All Categories
EN

Home > Showlist

About Us

Outdoor light sensor

Your outdoor space can benefit from convenience and safety-enhancing motion outdoor light sensor. They eliminate the need to keep the lights on during the day by turning on and off when they notice movement in their detection area.


To detect the movement of people and objects, motion sensors combine heat and infrared radiation. Some have a photocell function as well, which turns the light off during the day.


Motion Sensors

Your outdoor lights can be turned on when it gets dark and off when there is no movement with the help of motion sensors. In commercial buildings, they can also be used as energy-saving occupancy sensors to turn off lights when nobody is using them.


Motion sensors come in a variety of forms, and they are all intended to detect movement and illuminate the space where they are installed. To ensure optimal coverage and prevent false alarms, they employ a variety of detection techniques.


A PIR sensor, which uses infrared heat to detect movement, is a good illustration. These sensors are less power-hungry than active ones, inexpensive, and simple to use.


They come in a variety of brightness levels and can be installed indoors or outdoors. Dimmer models work well for straightforward settings in entranceways, while brighter models are better for lighting driveways and walkways.


You can avoid the motion sensor and have your light powered by a hot wire coming from your switch's line by hardwiring some models to an additional light switch. That's all there is to it!


  • Light Bulbs

    Light Bulbs

    With a straightforward bulb that plugs into your existing socket, you can add motion sensing functionality to an outdoor lighting fixture like solar sensor wall light. These light bulbs have an integrated passive infrared sensor that detects movement and switches the light on and off automatically as needed.


    You can select a Dusk to Dawn bulb to increase security by having it turn on when it gets dark and turn off when the sun comes up. They are ideal for spaces like a walkway or a porch that you don't want to keep lit all day.


    Although bulbs come in a variety of sizes and shapes, brightness is the most crucial factor. The lumens of a light bulb measure how much light it emits, while the wattage indicates how much energy it consumes.


  • Wiring

    Wiring

    The use of outdoor light sensors can help ensure that your lights are only turned on when necessary. . a


    It's not difficult to add a motion sensor to your current lights. However, it does necessitate some understanding of how the wiring in your house functions.


    Find out where the connections between the lights and your sensor are first. The breaker for the lighting circuit can be found in the main electrical box of your house.


    Once you are aware of where the breaker is, twist the black wire on the light fixture and the insulated bare copper wires from your motion sensor together using a pair of pliers. In order to create a strong electrical connection, cover them with a plastic wire nut.


    The hot and neutral wires of the sensor must next be connected to the existing light switch. To prevent the sensor from interfering with the lighting, make sure the connections are made in the correct sequence.


  • Installation

    Installation

    Outdoor lights with motion sensors like solar sensor light increase your home's security. When motion is detected, these lights will turn on, making it harder for burglars to see inside your home.


    These lights can be installed in a variety of locations, including your home's front porch, the driveway, and close to the garage door. Six to ten feet above the ground is the ideal height for these lights so they can illuminate your entire property and see any movement from onlookers.


    The sensitivity and range of the sensors, as well as the on-time settings, are just a few of the features that can be changed on the majority of motion sensor lights. Some have a test mode where you can turn on the lights in the open while adjusting them for maximum sensitivity.


    In some models, you can adjust the on-time setting to make the lights turn on for, say, one or five minutes after being turned on. If you want a motion-activated light that turns on when it gets dark but only if there is movement, this might be a good option.


Why choose Changsha Enlighten Outdoor light sensor?

  • High-Efficient Management Team

    Our company has always been dedicated to providing top quality products and outstanding service. Enlighten Lighting provides innovative luminaires that can be used both indoors and outdoors, and perfect lighting solutions that satisfy your requirements.

  • Reliable Quality Assurance System

    We are always thinking about the quality and durability of LED products like wall led. We have a good quality control system. Our inspectors will examine the quality with a strict eye. From raw material to finished product, our inspector will verify the quality. Our QC examines the product prior to packaging.

  • Attention to Detail & Timely response

    Enjoy the benefits of long-term production. We are extremely familiar with the products such as wall lights and have made enhancements to the product to meet the needs of the consumers.Our sales staff works almost as long as yours to get back to you quickly. If you have any other concerns, we'll be happy to assist you.

  • Application of wall lights

    The led wall light is one of the most suitable outdoor lightings for areas like stairways and pathways, where there is a high chance of falling or sliding, and it is used in both interior decoration and lighting and outdoor lighting of buildings. Learn about outdoor wall lights to help you select the best one for your home.

Related product categories

Not finding what you're looking for?
Contact our consultants for more available products.

Request A Quote Now

Hot categories