All Categories
EN

Home > Showlist

Wiring

In order to provide power to your new led wall lamp, you may need to run additional wire depending on the type of switch that you are installing. In most cases, the circuit will be made up of a spur cable that runs from the place where the power source is located to a junction box.

After that, you will have to attach the lights and switches to the spur cable using the appropriate connections. In order to accomplish this, you will need to cut channels into the wall. These channels will serve as the passageways for the cables.

In order to rule out the possibility of there being a live cable flowing between your power supply and the lighting circuit, you will need to check that both the switch and the lights have a core that is earthed or that they have double insulation.

You will need to wire the switch cable in the manner depicted in Figure 1 in order to use a system with two wires. The live power supply is brought to the switch through the brown cable, which is labeled "Live." The light fitting receives power through the blue wire, which has a "Switched" designation.

  • Installation

    Installation

    Wall lights that have switches are available in a wide variety of designs and finishes to accommodate any aesthetic. They are an excellent method to impart personality into a space while also contributing to the room's overall illumination.

    The method of installing a wall lights with switch is easy and uncomplicated, and it does not require any specialized knowledge or abilities. However, you should always follow the directions that are provided to you by your local electrical merchant because doing so will guarantee that your new wall light is correctly installed and that it is safe to use.

  • Installation

    Installation

    To begin, check to see if there is a connection to the mains electricity supply in the location where you plan to install the wall light with switch. In most cases, there are two or three wires that need to be connected. These include a black wire, a blue wire, and maybe a third wire if the lamp is earthed (has a yellow-green grounding wire).

  • Strip off about 0.5cm of

    Strip off about 0.5cm of

    Once you have reached the connector block, remove about half a centimeter's worth of the plastic wrapping that was around the black and blue wires. After you have put all of the wires into the connector block, use a screwdriver to make sure it is securely fastened, and then check to make sure none of the wires are hanging loose.

    Maintenance

    Your home should have routine maintenance performed on the wall light with switch because it is an excellent piece of equipment that needs to be kept looking as good as new. To begin, you will want to make the most of your money by purchasing a high-quality light bulb that will last you for a long time. Because of this, you should be sure to stock up on industrial wall lights bulbs for every room in the house as soon as you can. In a similar vein, you need to be on the lookout for any signs of wear and tear on your switches and outlets, and you should immediately replace them if you find any. Utilizing the services of an expert to perform a checkup on the upkeep of your property is the method that will yield the best results. It is my sincere hope that this will spare you the stress and inconvenience of having to pay for expensive repairs in the future.

Why choose Changsha Enlighten Wall light with switch?

  • High-Efficient Management Team

    Our company is committed to providing excellent service and top quality products such as outside wall lights. Enlighten Lighting designs and manufactures luminaires for indoor or outdoor applications. They also provide perfectly matching lighting solutions to meet the needs of all.

  • Reliable Quality Assurance System

    We are very worried about the long-term quality and durability of LED products like black outdoor wall lights. We have a good quality control system. Our inspector will check the quality seriously. We'll check the quality from raw material to the finished product. Our QC examines the product prior to packaging.

  • Attention to Detail & Timely response

    We have a long history of manufacturing and are able to offer you the best products like outdoor wall lights with pir. Our sales' time of operation is similar to the time that you work, and we can communicate with you at any time. If you have any further questions, we will be glad to help you.

  • Application of wall lights

    The wall lamp is an ideal lighting solution for outdoor walkways and stairs in areas where there is a high chance of falling. It is also used for interior lighting and decoration. This article will help you to choose the right lighting for your outdoor wall at home.

Not finding what you're looking for?
Contact our consultants for more available products.

Request A Quote Now